Chapter 7 Device Configuring Using EMS
Cross Connections
© 2012 Harmonic Inc.
130
ProView 7000 v.2.6, Rev. E
7.6.1.1
Transport Stream Cross Connect (Stream Pass Through)
You can cross connect transport streams between different multiplex inputs and outputs and
optionally remap selected PIDs.
To create a transport stream cross connection:
1. Drag a multiplex from the Multiplex Input box and drop it onto a multiplex out or a
decoder in the Multiplex & Decoding Output box.
A Cross-Connect editor dialog displays, allowing setting up the parameters for the routed
element.
Figure 7–26: TS Cross Connect
2. Click
Create
to create the stream cross-connect.
Remapping PIDs
Prerequisites:
■
DSR license
■
Transport stream cross connection
To remap PIDs:
1. Right-click
Transport Stream Port Route
in the
Multiplex & Decoding Output
box.
2. Select
Properties
.
3. Select the PID Remapping tab.
4. Enter the Input PID and the output PID.
5. Click
Submit
.
