Harmonic Drive SC-610 Series, Operation Manual, Page: 62 / 69

Operations Manual SC-610 Page A11
Harmonic Drive AG 900105 11/2005
APPENDIX E
Software Installation
General:
The WorkBench set-up software is Windows-based and guides you through all steps
necessary,to set-up your Servo Drive via a serial port of your PC. Online-Help to each topic
makes a manual obsolete.
A) Minimum system requirements
Hardware requirements (minimum):
Processor: Intel Pentium / 133 MHz
RAM: 32MByte
Hard Disk Space: 40Mbyte
Screen: 800 x 600 (min.)
Recommended: Intel Pentium, 64 MB RAM, 200 MHz, 60MB hard disk space free
Software requirements:
Operating System: Windows 2000
Recommended: Windows 98, Windows ME,
Windows 2000 (SP4+), Windows XP (SP1+)
B) Installation
To install the WorkBench software on your computer's hard disk, please follow the sequence described
below:
1.) Start Windows. Make sure, that no other programs are running, while Installation of WorkBench is done.
2.) Place Installation CD ROM in your computer's CD ROM drive.
3.) Look for E: (if E is your CD ROM drive) and double click on Setup_xxxx.exe.
4.) According to demands from the installation process, insert Installation Disk with required number.
After installation process is finished, a Program Manager Group for WorkBench with WorkBench ProgMan
Icon is created. Double clicking this icon will start the WorkBench set-up program.