Harmonic Drive SC-610 Series, Operation Manual

Page: 5 / 69

Page 2 Operations Manual SC-610
Harmonic Drive AG 900105 11/2005
General Information and Safety Guidelines
Microsoft and MS-DOS are registered trademarks, and Windows is a trademark of Microsoft Corporation.
UL and cUL are registered trademarks of Underwriters Laboratories.
CE Compliance
A custom unit may be required, contact Harmonic Drive. Compliance to Directive 89/336/EEC is the
responsibility of the system integrator. Servo controller, motor and all system components must have proper
shielding, grounding and filtering.
Product Notice Intended use:
These drives are intended for use in stationary ground based applications in industrial power installations
according to the standards EN60204 and VDE0160. They are designed for machine applications that require
variable speed controlled three phase brushless AC motors.
These drives are not intended for use in applications such as:
-
Home appliances
- Medical instrumentation
- Mobile vehicles
- Ships
- Airplanes
Unless otherwise specified, this drive is intended for installation in a suitable enclosure. The enclosure must
protect the control from exposure to excessive or corrosive moisture, dust and dirt or abnormal ambient
temperatures. The exact operating specifications are found in Section 1 of this manual.
The installation, connection and control of drives is a skilled operation, disassembly or repair must not be
attempted.
In the event that a control fails to operate correctly, contact the place of purchase for return instructions.
Safety Notice :
This equipment contains high voltages. Electrical shock can cause serious or fatal injury. Only qualified
personnel should attempt the start-up procedure or troubleshoot this equipment.
This equipment may be connected to other machines that have rotating parts or parts that are driven by this
equipment. Improper use can cause serious or fatal injury. Only qualified personnel should attempt the start-
up procedure or troubleshoot this equipment.
-
System documentation must be available at all times.
- Keep non–qualified personnel at a safe distance from this equipment.
- Only qualified personnel familiar with the safe installation, operation and maintenance of this device
should attempt start–up or operating procedures.
- Always remove power before making or removing any connections to this control.