Hardi HC 9600, Operator'S Manual

Page: 89 / 212

4 - System setup
87
Advanced tab
The tab allows to specify:
• Settings for copying log files.
• Specify Key Switch Standby settings.
• View and manually upgrade module
firmware.
• Create and restore backup files.
±
WARNING! The Export Diagnostic Files,
Advanced Parameters, Copy Debug Files,
Clear Debug Files and Service Mode
functionality on the Advanced Tab is
reserved for use by the manufacturer. DO
NOT change any of these settings without
specific instruction from the manufacturer.
Key Switch Standby This setting allows the display to remain powered up after the vehicle power has been shut
down. The display will switch into standby mode and will appear to be shut off; however the
power light will change to an amber color.
Pressing the touch-screen while it is in standby mode will immediately turn the screen back on
again. For this feature to work, the display must be connected to switched power.
Use
/ to specify a length of time that you wish the display to remain powered
up in standby mode after the vehicle power has been shut down.
÷
NOTE! When the time you specified in Key Switch Standby is nearly expired, then the
amber-colored power light will flash on and off immediately preceding shutdown. If
you wish the display to remain powered up for a longer period of time, touch the
display to restart the Key Switch Standby countdown.
About button Displays product licensing information and copyright information.
Memory Adjusts information stored in the display’s internal memory.
• Create Backup.
Press to create a backup file of all configuration settings, products, and Grower-Farm-
Field Management data structure on the USB drive. Backup files are stored using the .ibk3
file format.
• Restore Backup.
Press to restore a backup file from the external data drive to the internal memory of the
display.
• Clear Internal Memory.
Press this button to clear the internal memory of the display. The system will present a
warning dialogue box and ask if you would like to create a backup file prior to clearing
the memory.
±
WARNING! Once you clear the system’s internal memory, this information is deleted and
cannot be restored unless a backup has been made.
Advanced
Export Error
Diagnostic Files
Restore
Backup
Create
Backup
View Module
Firmware
Copy
Debug Files
Clear
Debug Files
Clear Internal
Memory
Remove
Patterns
Advanced
Parameters
Service
Mode
General Display Features
Advanced
Log Files Memory
Guidance
About
Key Switch Standby
(minutes)
Memory
Test
Export GPS
Diagnostic Files
Console Setup
Clear GPS
Diagnostic Files
AgFiniti