Hardi HC 9600 Operator'S Manual Download Page 90

Page: 90 / 212

4 - System setup

View Module Firmware

Displays the Module Firmware Management screen, which is a list of all firmware modules and

firmware versions that are available for the display.

NOTE! The Module Firmware Management list includes module firmware that you may

not be running.

•

Import
Imports any firmware stored on the USB drive into the display memory.

•

Direct Upgrade
Upgrades an individual module directly from the USB.

NOTE! Pressing the Remove button does not remove firmware from the module itself. It

merely removes the upgrade file from the display.

Remove Patterns

NOTE! Pressing this button permanently erases all guidance patterns from the display’s

memory.

Summary of Contents for HC 9600





















































































































































































































Search results

Summary of Contents for HC 9600

Reviews:

Related manuals for HC 9600

Brands by name

Popular brands

Hardi HC 9600, Operator'S Manual

Search results

Summary of Contents for HC 9600

Reviews:

Related manuals for HC 9600

Brands by name

Popular brands