Hardi HC 9600, Operator'S Manual

Page: 153 / 212

151
5 - Operation
Map Screen
Configuration Setup Screen
The Configuration Setup screen is where you can make settings adjustments for your equipment, ground speed, GPS, and
controllers.
The appearance of this Configuration Setup screen varies, based on your particular configuration. Most Configuration
Settings screens will include the following buttons.
• Vehicle Offsets. For more information, see “Vehicle Offsets” on page 91.
• Speed Input. For more information, see “Speed Input Settings” on page 89.
• Automatic Swath Control. For more information, see “Automatic Swath Control (AutoSectionControl)” on page 90.
• Swath Section Offsets. For more information, see “Swath Section Offsets” on page 92.
• Equipment Settings. Not relevant for HARDI® sprayers.
Mapping Toolbox
Legend Settings
On the Legend Select screen, press the Setup (wrench) button next to the Rate button, and the Legend Settings
screen appears. The Legend Settings screen allows you to change the default legend.
÷
NOTE!
• The Legend Settings screen can also
be accessed by pressing the Edit
Legend button on the Setup screen’s
Product Tab.
• Legend settings changes that are
made at the Legend Settings screen
will affect all regions.
The Legend Settings screen includes the following
items:
• Attribute
Appears at the top left of the Legend Settings screen. Attributes shown for Harvest include Yield and
Moisture. The Rate attribute is shown for Planting and Application operations. You can adjust the
color scheme, spacing and ranges as they appear on the map screen, by using the buttons described
below.
• Average
The Average button changes the average rate for the legend. Press
to specify the average of the ranges
shown on the map legend.
Configuration
Your Specific
Configuration
Save as Product Legend
Reset to Default
Legend
Automatic
Legend
Legend Settings
Attribute: Rate
Average Color Scheme
Range Spacing Range
Green-Yellow-Red
Legend
Attribute: Yield