Hardi HC 9600, Operator'S Manual

Page: 49 / 212

4 - System setup
47
Multiple Universal Terminals
If there are multiple ISO implements connected,
press the
button to toggle between Working
Sets.
The Working Sets can also be accessed by pressing
tabs (A) or (B) individually.
μ
ATTENTION! If the HARDI® UT displays 123.4,
then there is no communication with the
JobCom. Make sure to power On the
JobCom at the SetBox before proceeding.
Advance through multiple screens of soft keys. This button remains hidden unless more than 10 soft keys are
present.
Opens the Universal Terminal
Settings screen.
• Auxiliary Assignment
Assign implement functions to ISO
compatible inputs.
• Clear Universal Terminal
Allows operator to clear the Object Pools
sent to the display from the implement WSM.
After the object pools have been cleared, the
next time the implement is connected, the
object pools will be transferred from the
implements WSM to the display again. When
this button is pressed, a warning dialogue
box appears with the following message:
“All Universal Terminal interfaces saved in the
display will be cleared. Do you want to
continue?”
μ
ATTENTION! No data will be lost while clearing the Universal Terminal. All data will be reloaded to the display the next
time the HARDI® JobCom is connected.
Auxiliary
Assignment
Universal Terminal Settings
Clear Universal
Terminal