h/p/cosmos mercury, User Manual

Page: 65 / 213

operation
file: n:\article\cos14310m5-v1_06hpc-en\20120215_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.doc
© 2012 h/p/cosmos sports & medical gmbh email@h-p-cosmos.com created 15.02.2012 printed 15.02.2012 page: 65 of 213
[7.B3]
Manual mode
Initiation: Running belt is not moving. One of the modes LED ~ is flashing: (manual, profile, cardio, test)
[7.B3]
Step no. Activity Keys Response / Display
[01] Select operational mode manual
a
or
d
Alteration of the mode (manual, profile, cardio, test) until
~
manual is flashing
[02] Start operational mode manual
c
A) In case of deactivation (standard) in the optional
functions:
~ manual, km/h, m and % are glowing
~ met,
energy and power are glowing by turns
Running belt accelerates up to the pre-selected starting-
speed (standard: 0.5 km/h, can be changed in the
optional mode), start of measuring
%
indicates present heart rate: P. 40 ... P. 220. The
display indicates every single heart-beat with a flashing
dot behind the P
B) In case of activation in the optional functions:
%
indicates: 65 flashing (for 65 kg body weight)
~ weight is glowing
in order to enter with
a
or
d
and then
c
the body
weight for an accurate calculation of the POWER and
ENERGY consumption.
Further steps see A)
[03] Alteration of speed
a
or
d
press and hold
Speed is being increased / reduced (0-max.) as long as
the key get pressed. If Speed is being reduced down to
„0“= Pause-position:
=
indicates: PAUS. Current values will be
sustained.
[04] Alteration of acceleration and
deceleration level for speed
a
or
d
press several times
and then hold
Example: For acceleration or deceleration level “3”,
press 3 times the corresponding key and then hold.
Note: Maximum 7 levels, limited by the maximum
acceleration level selected in the Optional Mode /
standard value = 4.
[05] Pause mode
a
If Speed is being reduced down to „0“ = Pause position
=
indicates: "PAUS". Running belt stops. All
displays stop. Current values will be sustained.
When restart with
d
or
c
all display values will be
"added".
[06] Alteration of elevation
f
or
e
press and hold
Elevation is being increased / reduced (0 ... max.) as
long as the key get pressed.