accessories & options
file: n:\article\cos14310m5-v1_06hpc-en\20120215_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.doc
© 2012 h/p/cosmos sports & medical gmbh [email protected] created 15.02.2012 printed 15.02.2012 page: 179 of 213
picture
type of stop
function
interface
communication
how to restart
Quick Stop
on Safety Arch
with chest belt,
harness/rope and
fall stop
prevention.
= pull-cord
operated switch
N
subject wears chest belt.
safety rope is pulled with
more than approx. 8 kg
N
running belt & inclination
system stop very fast
N
drive motor is used to stop
the running belt very fast on
the oversize machines
venus/saturn
N
machine is NOT cut off from
main power of drive motor
and inclination system
N
display active and shows
“PULL STOP”
N
interface active, but no start,
speed or elevation signal
executed
N
keyboard inactive
communication
NOT interrupted
during Quick-
Stop and/or
“pull stop” stage
N
release weight
from safety rope
N
press START key,
N
or new command
through interface
h/p/cosmos safety arch with chest belt and harness [cos10079]
(indicate model of running machine)
Chest-harnesses, patient-vests, waist-belts with leash and cuffs are not designed for direct skin or
mucous membrane contact. Wear appropriate clothing.
[12.M]
Running belt rotation reversible for downhill walk
N
As the subject is running against the usual running belt rotation and therefore has no control
of the UserTerminal it is necessary to have a supervisor who controls the running machine
during the training. For safety reasons the max. speed has been limited with the models
possessing a cross-bar handrail or a motor case cover. Use a safety arch with harness for
additional safety.
N
Turn the key-operated switch for the reverse belt rotation only when the running belt is not
moving.
The function running belt rotation reverse (optional) permits a simulation of a downhill run. To prevent any abuse, the
function can only be activated by a key-operated switch (on the external UserTerminal of the oversize running machine
by rotary switch).
N
If the key-operated switch is being activated at stand still, the running belt rotation reverse will be in function at the
next start.
N
If the key-operated switch is being activated while the Running-Machine is in operation, the Running-Machine stops
and the running belt rotation reverse will be in function at the next start.