optional settings
file: n:\article\cos14310m5-v1_06hpc-en\20120215_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.doc
© 2012 h/p/cosmos sports & medical gmbh [email protected] created 15.02.2012 printed 15.02.2012 page: 120 of 213
[8.B2]
OP 35
Oil Interval
1.000 km (treadmills)
100 km (ladder ergometer)
0 = no supervision
100 ... 5.000 km
OP 37
Interval for service message TSC
(time-dependent)
for technical safety control E.02 “HELP"
12 month
0 … 48 month
OP 38
Service Interval (distance-dependent)
"E 02" "HELP"
5.000 km (treadmill)
500 km (ladder ergometer)
1.000 ... 9.999 km (treadmill)
100... 5.000 km (ladderergometer)
OP 39
Elevation: display as set point or true
value
1 (true value)
0 = set point
1 = true value
OP 40
Speed: display as set point or true value
1 (true value)
0 = set point
1 = true value
OP 41
Elevation control after STOP
0 (Elevation maintains)
0 = Elevation maintains
1 = Elevation gets down to 0 %
OP 46
Display and setting of elevation for
ladder ergometer
75 (degree)
0 … 180 degree
OP 47
Set back of oil- and service interval
OP 48
Running-Belt-Speed at maximum
frequency inverter speed
(depending on the device type;
OP 03)
(depending on the device type;
OP 03)
1.00 … 99.99 km/h
OP 49
Type of FI Control
RS-485
Analogue, RS-485
OP 51
Error statistics of the digital FI-control
n.a.
0 to 9999 per type of error
OP 89
System for elevation measurement
(depending on the device type;
OP 03)
(depending on the device type;
OP 03)
OP 90
Load or save default setting
n.a.
n.a.
OP 91
Total time of operation MCU
(incl. stand by)
n.a.
0 ... 1.193.046 h
OP 92
Total Distance
n.a.
0 ... 4.294.976 km
OP 93
Total time of operation (incl. stand-by)
n.a.
0 ... 1.193.046 h
OP 94
Total time of use (motor + belt)
n.a.
0 ... 1.193.046 h
OP 95
MCU serial number
n.a.
0000 0000 to 9999 9999
OP 98
Setting for limitation of time of use
n.a.
n.a.
OP 99
Test-Profile 99 for endurance testing in
the factory / service
0 = Test 99 de-activated
0 = Testprofile 99 de-activated
1 = Testprofile 99 activated