GRASS VALLEY EDIUS User Reference Manual Download Page 20

Page: 20 / 790

EDIUS — User Reference Guide

Preface

Minimum System Requirements

•

Intel® or AMD® CPU 3.0 GHz or faster (multiple CPUs or multi-core
CPUs are recommended; SSE2 and SSE3 instruction sets supported).

•

1 GB RAM (2 GB or more recommended)

•

800MB or more free disk space for the software installation.

•

DVD-ROM Drive for software installation.

•

DVD-R/RW or DVD+R/RW drive required when creating DVD video
with Burn to Disc

•

Blu-Ray BD-R/BD-RE drive required when creating Blu-Ray disc with
Burn to Disc

•

DirectX 9.0 or later

•

Graphics card supporting Direct3D 9.0c or later and support for Pixel-
Shader Model 3.0 is required.

•

For SD editing: 128 MB RAM or larger required; 256 MB or larger
recommended.

•

For HD editing: 256 MB RAM or larger required; 512 MB or larger
recommended.

•

ATA 100/7200 rpm or faster hard drive is necessary for video storage.

•

Available hard drive space should be twice the size of file to be
edited.

•

RAID 0 recommended for HD editing.

•

One free USB port (1.1 or higher) for software protection key.

•

Soundcard with WDM driver support is required.

•

Supported operating systems:

•

Windows® XP Home or Windows XP Professional (Service Pack 2
or later, 32-bit)

•

Windows® Vista ( SP1 or later, 32-bit or 64-bit) including the fol-
lowing:

•

Windows® Vista Home Basic

•

Windows® Vista Home Premium

•

Windows® Vista Business

•

Windows® Vista Ultimate

Note

External video decks/camera may require either a free IEEE 1394 FireWire
port or USB 2.0 port for connectivity.

Summary of Contents for EDIUS























































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EDIUS

Reviews:

Related manuals for EDIUS

Brands by name

Popular brands

GRASS VALLEY EDIUS, User Reference Manual

Search results

Summary of Contents for EDIUS

Reviews:

Related manuals for EDIUS

Brands by name

Popular brands