80
Programming fields:
Continued from previous page
Field “5”
: Configuring the external
buttons.
push
5
Press
“
5
”
to select field
“
5
”
.
Steps: Field +
button mode + activation time + key button.
push
6
C
or
(
1)
Step
(
6)
Step
Set the external
button to select for configuration. Enter one of the following options:
push
"1" :
Select external
button PL1.
push
"2" :
Select external
button PL2.
push
Allows external
buttons PL1 and PL2 to be configured with the following modes:
push
-
Allows the button to: Always be enabled or, through button codes CP1 or CP2, enable/disable the functioning of the
button.
-
Allows an activation time for external
buttons PL1 and PL2 of between
“
01
”
and
“
99
”
seconds for the relay 1 and
push
relay 2 outputs respectively. Only takes effect if the relay output of the external
button has been configured in
push
impulse mode (see p.
,
“
step 3
”
).
79
Note: External
buttons PL1 and PL2 activate relays 1 and 2 respectively.
push
2
1
(
3)
Step
Set the push button mode selected in step 2.
Enter one of the following options:
"0" :
Always enabled.
"1" :
Enable/disable function with the CP1
button code.
push
"2" :
Enable/disable function with the CP2
button code.
push
(
5)
Step
Press the key button to finish programming the field.
Note: It is not necessary to press the key button if it has already been pressed in step 4.
Then press the number of the next field to configure or press the C button (cancel) to exit
programming mode.
5
0
1
or
2
or
2
1
(
2)
Step
0
or
or
1
2
or
0
1
or
(
4)
Step
Set the activation time for the external
button selected in step 2. Only takes effect if
push
the relay output has been configured in impulse mode (see p.
,
“
step 3
”
).
79
Enter a value from
“
01
”
to
“
99
”
seconds or press the key button.
Note: If the key button is pressed, this field is set with a value of
“
03
”
seconds and the
programming of the field finishes.
1
0
*
( )
*
( )
AUDIO AND VIDEO DOOR ENTRY SYSTEM - CODED DOOR PANEL
PROGRAMMING THE DOOR PANEL
Summary of Contents for NEXA Series
