golmar NEXA Series, User Manual

Page: 112 / 146

112
Description of the Nexa BUS link connector:
The Nexa BUS link connector is located on the bottom right of the back of the display module.
Connect the cable supplied with the module to other modules using the NEXA Bus:
ð
EL632 / E 642: L Connect the module to provide the system with a sound module.
ð
N3301/AL: Connect the module to provide the system with access control and a coded door panel.
ð
N3301A/AL: Connect the module to provide the system with an alphabetic panel.
ð
E 3002: L Connect to the bus to power information panels (maximum units). 3
ð
CD-NEXA/BT: Connect the module to provide the system with a wireless configuration interface.
Description of the USB connector:
The USB connector enables the door panel to be programmed through the USB port of a
computer. To do so, it is necessary to download the MEMEDIT 5 program from the
documentation page https://doc.golmar.es. This program can be used to programme the
door panel and back up installations to enable the restoring of devices whose memories,
due to error or fault, have been damaged.
Description of the USB connection LED indicator:
The USB connection LED lights up once the computer has detected the module via the USB
interface. It is necessary to install the MEMEDIT 5 program and follow the installer
instructions. If everything has been set up correctly, the LED will light up every time the
module is connected to the computer via USB.
INSTALLATION OF THE DOOR PANEL
1
N V S CE 90C
99
132,5
56,5
M dul s o e
Model
W
H
D
2
CEV90C N
99
238
56
3
CEV90
99 mm.
328 mm.
56 mm.
1650
1850
1450
Make a hole in the wall to position the top of the door panel at a height of 1.65m.
Hole dimensions depend on the type of door panel.
The door panel has been designed to be used under most environmental conditions. It is however advisable to
take extra precautions to prolong its service life (shields, covered areas, etc.).
To obtain optimum video door entry system image quality, avoid direct contact from light sources (sunshine,
street lights, etc.)
Location of the embedding box:
AUDIO AND VIDEO DOOR ENTRY SYSTEM - CODED PANEL WITH DISPLAY
DESCRIPTION OF THE DISPLAY MODULE