golmar NEXA Series, User Manual

Page: 122 / 146

KEYPAD BEEP
USE TO CALL
ACCESS ID
CODE LENGTH
PROGRAMMING THE DOOR PANEL
122
USE TO CALL
PUSH BUTTONS PROG.
CODE LENGTH
KEYPAD BEEP
ACCESS CONTROL
ACCESS ID
CODE LENGTH
KEYPAD BEEP
Determines whether the door panel emits tones when the buttons are
pressed.
To change, press .
Determines whether it is necessary to press the button to make calls to the
system's monitors/telephones.
To change, press .
Enables a code to be assigned to a call button on an EL-610D button
module, if the door panel features one.
To save a code, press and the message ENTER VALUE will appear; enter
the code to be assigned to the button, then press to save the code. The
message CHOOSE BUTTON will then appear; press the call button on the
EL-610D module and the message DATA SAVED will appear to indicate
that it has been correctly saved.
1 0 5 0 1 8
ENTER VALUE
:000000
CHOOSE BUTTON
SETTING RECORDED
KEYPAD BEEP
USE TO CALL
PUSH BUTTONS PROG.
AUTO PROGRAMMING
Determines whether the automatic programming process for monitors is
activated.
It is necessary to complete the con fi guration of the options of the
PROGRAM USING and START POSITION menu starting the
before
process.
The programming process is shown on p. 1 . 24
To change, press (Gtwin ). system without function .
USE TO CALL
PUSH BUTTONS PROG.
AUTO PROGRAMMING
PROGRAM USING
Determines whether the RESIDENT LIST will be followed, going through
the entries one by one, or a numeric INDEX corresponding to the monitor
code during AUTO PROGRAMMING.
To change, press (Gtwin ). system without function .
PUSH BUTTONS PROG.
AUTO PROGRAMMING
PROGRAM USING
START POSITION
Determines the starting monitor code if PROGRAM USING has INDEX
selected or the resident list contact number if PROGRAM USING has
REPERTORY selected.
Allows programming to resume from the point set by START POSITION.
(Gtwin ). system without function
System settings menu
Continued from previous page
AUDIO AND VIDEO DOOR ENTRY SYSTEM - CODED PANEL WITH DISPLAY
Continued overleaf