The SW1 DIP switch is located on the top right-hand side of the back of the module.
To set the DIP switches, use the tool supplied with the sound module.
Set to ON
. If the building has more access
only on one door panel in each building or channel
doors, set the others to OFF.
Set to ON for
door panel tone volume or OFF for NORMAL volume.
HIGH
*
Factory setting
106
Description of the SW1 DIP switch:
DESCRIPTION OF THE SOUND MODULES
Description of the CN7 Nexa Bus link connector:
The CN7 Nexa Bus link connector is located on the top right-hand side of the back of the sound
module.
Connect the cable supplied with the module to other modules using the NEXA Bus:
ð
N3403/AL:
Connect the module to provide the system with a display viewer.
ð
N3301/AL:
Connect the module to provide the system with access control and a coded door panel.
ð
N3301A/AL:
Connect the module to provide the system with an alphabetic panel.
ð
E 3002:
L
Connect to the bus to power information panels (maximum units).
3
ð
Connect the module to provide the system with a wireless configuration interface.
CD-NEXA/BT:
In this operating mode, DIP switches 1, 2, 3, 4, 6 and 8 have no function.
AUDIO AND VIDEO DOOR ENTRY SYSTEM - CODED PANEL WITH DISPLAY
Summary of Contents for NEXA Series
