golmar NEXA Series, User Manual

Page: 21 / 146

21
MODULE PROGRAMMING
Factory setting:
-
Special codes:
Bear in mind the number of digits in the code (see p. 10).
Administrator pin: 271800. 2718 if the number of digits configured = 4.
CP1 button code: 111100.
1111 if the number of digits configured = 4.
CP2 button code: 222200. 2222 if the number of digits configured = 4.
Unlocking code: 333300. 3333 if the number of digits configured = 4.
-
Number of digits in user and special codes:
Programming field “ 0 ” (page 12)
Step 2: “ 4 ” – 4 digit code.
-
Setting relay 1:
Programming field “ 4 ” (page 16).
Step 3: “ 0 ” Impulse.
Step 4: “ 03 ” Activation time (seconds).
-
Setting relay 2:
Programming field
“
4
”
(page 16).
Step 3: “ 0 ” Impulse.
Step 4: “ 03 ” Activation time (seconds).
-
Setting the panic output:
Programming field “ 4 ” (p. 16).
Step 3: “ 0 ” Impulse.
Step 4:
“
10
”
Activation time (seconds).
-
Setting external push button PL1:
Programming field “ 5 ” (page 17).
Step 3:
“
1
”
Enable/disable the functioning of the push button with button code CP1.
Step 4: “ 10 ” Activation time (seconds).
-
Setting external push button PL2:
Programming field “ 5 ” (page 17).
Step 3: “ 2 ” Enable/disable the functioning of the push button with button code CP2.
Step 4: “ 05 ” Activation time (seconds).
-
Setting locking mode:
Programming field
“
6
”
(page 18).
Step 2: “ 3 ” Maximum number of failed attempts to enter user pin.
Step 3: “ 03 ” Minimum time between failed attempts (minutes).
Step 4:
“
03
”
Duration of locking mode (minutes).
Step 5: “ 1 ” The panic output is activated during locking mode.
-
Setting identification ID:
Programming field “ 7 ” (page 19) ( ). Not to be configured
Step 2: “ 000 ” Identification ID. Do not modify this field value.
-
Setting depth of field:
Programming field “ 8 ” (page 19) ( ). Not to be configured
Step 2: “ 3 ” Depth of field. Do not modify this field value.
Step 3: “ 0 ” Direct call disabled. Do not modify this field value.
-
Setting the keypad beep:
Programming field “ 9 ” (see page 20).
Step 2: “ 1 ” Beep when keypad buttons pressed (activated).
AUDIO AND VIDEO DOOR ENTRY SYSTEM - ACCESS CONTROL