golmar NEXA Series, User Manual

Page: 130 / 146

BUS CODE
CALL CODE
VISIBLE
RESIDENT NAME
SYSTEM CONFIG
ACCESS CONTROL
RESIDENT LIST
PROGRAMMING THE DOOR PANEL
Resident list menu:
130
To access the contacts resident list, follow the steps described on p. 1 and 17
press when the CONTACTS RESIDENT LIST message lights up.
Enables a NEW contact to be added to the end of the residents list, which
has a capacity for 1,990 contacts. To place a contact in a certain position,
use CONTACTS RESIDENT LIST: INSERT.
To add, press .
INSERT
MODIFY
DELETE
NEW
BUS CODE
CALL CODE
VISIBLE
RESIDENT NAME
ENTER NAME
BUS CODE
CALL CODE
VISIBLE
RESIDENT NAME
BUS CODE
CALL CODE
VISIBLE
José Pérez
P ress to add details to a contact as described on p. 1 . 34
After entering the information, press again to save the NAME of the contact.
Press to cancel the process and no changes will be saved.
Press to assign a monitor code using the numeric keypad.
If the door panel is con fi gured as a general entrance panel, a 6-digit code must
be entered: the fi rst three digits relate to the code of the inner building and
the last three to the monitor. If the door panel is not con fi gured as a general
entrance panel, only the three-digit monitor code needs to be entered.
After entering the information, press again to save the contact's BUS CODE.
BUS CODE
:000000
0 9 3 4 0 0
BUS CODE
CALL CODE
VISIBLE
RESIDENT NAME
003409
CALL CODE
VISIBLE
RESIDENT NAME
BUS CODE
CALL CODE
VISIBLE
RESIDENT NAME P ress to assign a 2nd CALL LIST code using the numeric keypad.
If the door panel has 2nd CALL LIST con
fi
gured with the value YES, a 6-digit
code to be used for making calls to this user needs to be entered.
After entering the information, press again to save the contact's CALL
CODE.
AUDIO AND VIDEO DOOR ENTRY SYSTEM - CODED PANEL WITH DISPLAY
Continued overleaf
CALL CODE
:000000
0 5 9 1 0 2