manualshive.com logo in svg

GMC 2001 Denali, Owner'S Manual

Share
Download
GMC 2001 Denali Owner'S Manual Download Page 93

2-6

Door Locks

CAUTION:

Unlocked doors can be dangerous.
D Passengers 

--

 especially children 

--

 can

easily open the doors and fall out of a
moving vehicle. When a door is locked, the
handle won’t open it. You increase the
chance of being thrown out of the vehicle in
a crash if the doors aren’t locked. So, wear
safety belts properly and lock the doors
whenever you drive.

D Young children who get into unlocked

vehicles may be unable to get out. A child
can be overcome by extreme heat and can
suffer permanent injuries or even death
from heat stroke. Always lock your vehicle
whenever you leave it.

D Outsiders can easily enter through an

unlocked door when you slow down or stop
your vehicle. Locking your doors can help
prevent this from happening.

There are several ways to lock and unlock your vehicle.

Use the keyless entry system.

You can also use your key.

To lock the door from
the inside, slide the
manual lever rearward.
To unlock the door,
slide the manual 
lever forward.

Summary of Contents for 2001 Denali











































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands