manualshive.com logo in svg

GMC 2001 Denali, Owner'S Manual

Share
Download
GMC 2001 Denali Owner'S Manual Download Page 185

3-10

Ventilation System

For mild outside temperatures when little heating or
cooling is needed, use outside air to direct outside air
through your vehicle. Air will flow through the
instrument panel outlets.

Your vehicle’s ventilation system supplies outside air 
to the inside of your vehicle when it is moving. With 
the side windows closed, air will flow into the front air 
inlet grilles, through the vehicle, and out the air 
exhaust valves.

Outside air will also enter the vehicle when the heater or
the air conditioning fan is running, unless you have the
recirculation button pushed in. For more information on
the recirculation button, see “Air Conditioning” earlier
in this section.

Your vehicle has air outlets
in the center and on the
sides of the instrument
panel and also may be
equipped on the headliner.

You can move the outlets from side

-

to

-

side or up 

and down to direct the flow of air. The left driver and
passenger outlets have shut off knobs. Turn the knob 
to the left to shut off air flow or to the right to allow air
flow. When you close an outlet, it will increase the flow
of air coming out of any outlets that are open. The
center outlet does not completely shut off airflow.

Summary of Contents for 2001 Denali











































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands