manualshive.com logo in svg

GMC 2001 Denali, Owner'S Manual

Share
Download
GMC 2001 Denali Owner'S Manual Download Page 266

5-12

NOTICE:

Engine damage from running your engine
without coolant isn’t covered by your warranty.
See “Overheated Engine Protection Operating
Mode” in the Index.

NOTICE:

When adding coolant, it is important that you 
use only DEX

-

COOL

R

 (silicate

-

free) coolant.

If coolant other than DEX

-

COOL is added to 

the system, premature engine, heater core or
radiator corrosion may result. In addition, the
engine coolant will require change sooner 

--

 at

30,000 miles (50 000 km) or 24 months,
whichever occurs first. Damage caused by the 
use of coolant other than DEX

-

COOL

R

 is not

covered by your new vehicle warranty.

If there seems to be no leak, start the engine again. 
See if the engine cooling fan speed increases when idle
speed is doubled by pushing the accelerator pedal down.
If it doesn’t, your vehicle needs service. Turn off 
the engine.

How to Add Coolant to the Coolant 
Surge Tank

If you haven’t found a problem yet, but the 
coolant level isn’t at or above the FILL COLD mark,
add a 50/50 mixture of clean, drinkable water and
DEX

-

COOL

R

 coolant at the coolant surge tank, 

but be sure the cooling system, including the 
coolant surge tank pressure cap, is cool before you 
do it. See “Engine Coolant” in the Index for 
more information.

Summary of Contents for 2001 Denali











































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands