manualshive.com logo in svg

GMC 2001 Denali, Owner'S Manual

Share
Download
GMC 2001 Denali Owner'S Manual Download Page 184

3-9

Defogging and Defrosting

On cool, humid days, use defrost to keep the windshield
and side windows clear. Use defrost to remove fog or ice
from the windshield in extremely humid or cold
conditions. Use defrost with the temperature knob
toward the red area and the fan control turned all the
way to the right.

Rear Window Defogger

The lines running across the rear window are the
window defogger grids. The lines warm the glass.

To turn on the rear window
defogger, press this button
located next to the fan knob.

The rear window defogger will only work if the ignition
is in RUN. For best results, clear the window of as much
snow or ice as possible first.

The defogger will shut itself off after several minutes. 
If you need additional warming time, press the button
again. You can turn the defogger off at any time by
pressing the button.

The rear window defogger button will also activate the
heated outside mirrors.

Do not attach a temporary vehicle license, tape or decals
across the defogger grid on the rear window.

NOTICE:

Don’t use a razor blade or something else sharp
on the inside of the rear window. If you do, you
could cut or damage the warming grid, and the
repairs wouldn’t be covered by your warranty.

Summary of Contents for 2001 Denali











































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands