manualshive.com logo in svg

GMC 2001 Denali, Owner'S Manual

Share
Download
GMC 2001 Denali Owner'S Manual Download Page 181

3-6

Rear Air Conditioning and Rear Heater 
(With Sunroof)

Your vehicle has the rear air conditioning and rear heater
system combination. Controls are provided to regulate
temperature, location and speed of the airflow.

Front Control

To adjust the airflow speed, turn the fan knob located on
the left side to the desired setting.

To regulate the airflow location, adjust the right knob on
the control panel. Turn the knob clockwise for floor vent
airflow or counterclockwise for headliner vent airflow.

Generally, the upper vents are used for air conditioning
and the floor vents for heating. The knob can be set to
any blend setting.

To adjust the air temperature, turn the temperature knob
on the center of the control panel.

For warmer air, turn the knob clockwise toward red. For
cooler air, turn the knob counterclockwise toward blue.

Summary of Contents for 2001 Denali











































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands