manualshive.com logo in svg

GMC 2001 Denali, Owner'S Manual

Share
Download
GMC 2001 Denali Owner'S Manual Download Page 256

5-2

Hazard Warning Flashers

Your hazard warning flashers let you warn others. They
also let police know you have a problem. Your front and
rear turn signal lamps will flash on and off.

But they won’t flash if you’re braking.

Press the button located 
on the top of the steering
column all the way down 
to make your front and rear
turn signal lamps flash on
and off.

Your hazard warning flashers work no matter what
position your key is in, and even if the key isn’t in.

To turn off the flashers, press the button until the first
click and release.

When the hazard warning flashers are on, your turn
signals won’t work.

Other Warning Devices

If you carry reflective triangles, you can use them to
warn others. Set one up at the side of the road about
300 feet (100 m) behind your vehicle.

Summary of Contents for 2001 Denali











































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands