manualshive.com logo in svg

GMC 2001 Denali, Owner'S Manual

Share
Download
GMC 2001 Denali Owner'S Manual Download Page 294

6-6

While refueling, hang the filler cap by the tether using
the hook located on the inside of the filler door.

To remove the cap, turn it slowly to the 
left (counterclockwise).

CAUTION:

If you get gasoline on yourself and then
something ignites it, you could be badly burned.
Gasoline can spray out on you if you open the
fuel filler cap too quickly. This spray can happen
if your tank is nearly full, and is more likely in
hot weather. Open the fuel filler cap slowly and
wait for any “hiss” noise to stop. Then unscrew
the cap all the way.

Be careful not to spill gasoline. Clean gasoline from
painted surfaces as soon as possible. See “Cleaning the
Outside of Your Vehicle” in the Index.

Summary of Contents for 2001 Denali











































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands