manualshive.com logo in svg

GMC 2001 Denali, Owner'S Manual

Share
Download
GMC 2001 Denali Owner'S Manual Download Page 314

6-26

Checking Coolant

The coolant surge tank is
located in the engine
compartment on the
passenger’s side of 
the vehicle.

See “Engine Compartment Overview” in the Index for
more information on location.

CAUTION:

Turning the surge tank pressure cap when the
engine and radiator are hot can allow steam and
scalding liquids to blow out and burn you badly.
Never turn the surge tank pressure cap 

--

 even a

little 

--

 when the engine and radiator are hot.

The vehicle must be on a level surface. When your
engine is cold, the coolant level should be at the 
FILL COLD mark.

If the LOW COOLANT
message comes on and 
stays on, it means you’re
low on engine coolant.

See “Low Coolant” in the Index.

Summary of Contents for 2001 Denali











































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands