manualshive.com logo in svg

GMC 2001 Denali, Owner'S Manual

Share
Download
GMC 2001 Denali Owner'S Manual Download Page 169

2-82

Change Engine Oil

This message is displayed
when the engine oil needs 
to be changed. The message
is only displayed for
15 seconds at the start of
each ignition cycle.

When you change the engine oil, be sure to reset the
Engine Oil Life System. See “Engine Oil, When to
Change” in the Index.

Security

This message is displayed
when the content
theft

-

deterrent system 

has been activated and 
also monitors the 
Passlock

R

 system.

If the security message is displayed continuously while
driving and stays on, there may be a problem with the
Passlock system. Your vehicle will not be protected by
Passlock, and you should see your GM dealer.

Low Washer Fluid

This message is displayed
when the vehicle is low on
windshield washer fluid.
The message is only
displayed for 15 seconds
each ignition cycle.

For more information, see “Windshield Washer Fluid” in
the Index.

Service Ride Control

This message is 
displayed when a possible
problem exists with the
Autoride

t system.

For more information, see “Autoride

t” in the Index.

Summary of Contents for 2001 Denali











































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands