manualshive.com logo in svg

GMC 2001 Denali, Owner'S Manual

Share
Download
GMC 2001 Denali Owner'S Manual Download Page 135

2-48

Center Console Storage Area Access Door

If you ever drop something between the cupholder door
and the center console area you can easily remove it by
following these steps:

1. Open the center console storage area by pressing the

button on the side of the console lid.

2. Locate the access door inside the storage area toward

the front.

3. Press the release edge (arrow) on the access door and pull

it out. You should now be able to retrieve the lost item(s).

Reverse the procedure to reinstall the access door.

Rear Storage Compartment

Your vehicle has a storage compartment located in 
the rear cargo area of the vehicle in the driver’s side 
trim panel.

To open the Denali compartment, press in on the release
latch and swing the compartment door open.

To open the Denali XL compartment, pull the latch to
access the compartment.

Cupholders

Your vehicle is equipped with cupholders for the front
and rear passengers located in the center console and on
the rear of the center console storage area. To use the
front cupholders press down on the raised area of the
access door. To access the rear cupholders, pull down on
the door located on the back of the console.

Summary of Contents for 2001 Denali











































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands