GMC 2001 Denali Owner'S Manual Download Page 26

Page: 26 / 394

1-13

Tilting the 50/50 Bench Seat

1. Fold the seatbacks forward using the instructions

listed previously.

2. Unlatch the seat from

the floor by pulling up
on the lever labeled “2”,
located on the rear of
the seat.

3. Lift the rear of the seat up off of the floor and push it

forward until it locks into place. You will not be able
to unlatch the seat from the floor unless the seatback
is folded down.

The seat will now remain locked in the upright position.

Returning the Seat(s) to an Upright Position

To return the seatback to an upright position, do
the following:

1. Pull the lever labeled “3” toward you.

2. While still holding the lever 3 toward you, grasp the

top of the seat and pull it toward you slightly.

3. Let go of lever 3 and pull the seat completely down.

4. Push down on the seat firmly. Try pulling it up to be

sure it is locked into place.

Summary of Contents for 2001 Denali










































































































































































































































































































































































































Search results

Summary of Contents for 2001 Denali

Reviews:

Brands by name

Popular brands

GMC 2001 Denali, Owner'S Manual

Search results

Summary of Contents for 2001 Denali

Reviews:

Brands by name

Popular brands