manualshive.com logo in svg

GMC 2001 Denali, Owner'S Manual

Share
Download
GMC 2001 Denali Owner'S Manual Download Page 335

6-47

CAUTION:

Using the wrong replacement wheels, wheel 
bolts or wheel nuts on your vehicle can be
dangerous. It could affect the braking and
handling of your vehicle, make your tires lose air
and make you lose control. You could have a
collision in which you or others could be injured.
Always use the correct wheel, wheel bolts and
wheel nuts for replacement.

NOTICE:

The wrong wheel can also cause problems with
bearing life, brake cooling, speedometer or
odometer calibration, headlamp aim, bumper
height, vehicle ground clearance and tire
clearance to the body and chassis.

See “Changing a Flat Tire” in the Index for 
more information.

Used Replacement Wheels

CAUTION:

Putting a used wheel on your vehicle is
dangerous. You can’t know how it’s been used or
how far it’s been driven. It could fail suddenly
and cause an accident. If you have to replace a
wheel, use a new GM original equipment wheel.

Summary of Contents for 2001 Denali











































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands