manualshive.com logo in svg

GMC 2001 Denali, Owner'S Manual

Share
Download
GMC 2001 Denali Owner'S Manual Download Page 208

4-7

Avoid needless heavy braking. Some people drive in
spurts 

--

 heavy acceleration followed by heavy 

braking 

--

 rather than keeping pace with traffic. 

This is a mistake. Your brakes may not have time to 
cool between hard stops. Your brakes will wear out
much faster if you do a lot of heavy braking. If you 
keep pace with the traffic and allow realistic following
distances, you will eliminate a lot of unnecessary
braking. That means better braking and longer 
brake life.

If your engine ever stops while you’re driving, brake
normally but don’t pump your brakes. If you do, 
the pedal may get harder to push down. If your engine
stops, you will still have some power brake assist. 
But you will use it when you brake. Once the power
assist is used up, it may take longer to stop and the 
brake pedal will be harder to push.

Anti-Lock Brakes (ABS)

Your vehicle has anti

-

lock brakes (ABS). ABS is an

advanced electronic braking system that will help
prevent a braking skid.

When you start your engine and begin to drive away,
your anti

-

lock brake system will check itself. You may

hear a momentary motor or clicking noise while this test
is going on. This is normal.

If there’s a problem with the
anti

-

lock brake system, this

warning light will stay on.
See “Anti

-

Lock Brake

System Warning Light” in
the Index.

Summary of Contents for 2001 Denali











































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands