manualshive.com logo in svg

GMC 2001 Denali, Owner'S Manual

Share
Download
GMC 2001 Denali Owner'S Manual Download Page 370

Scheduled Maintenance

7-15

j Change automatic transmission fluid and filter if the vehicle is mainly driven

under one or more of these conditions:

– In heavy city traffic where the outside temperature regularly reaches 

90

_F (32_C) or higher.

– In hilly or mountainous terrain.
– When doing frequent trailer towing.
– Uses such as found in taxi, police or delivery service.

j If you haven’t used your vehicle under severe service conditions listed

previously and, therefore, haven’t changed your automatic transmission fluid,
change both the fluid and filter.

j Inspect Positive Crankcase Ventilation (PCV) valve. 

An Emission Control Service. 

150,000 Miles (240 000 km)

j Drain, flush and refill cooling system (or every 60 months since last service,

whichever occurs first). See “Engine Coolant” in the Index for what to use.
Inspect hoses. Clean radiator, condenser, pressure cap and neck. Pressure test
the cooling system and pressure cap. 
An Emission Control Service.

ACTUAL

SERVICED BY:

MILEAGE

DATE

Summary of Contents for 2001 Denali











































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands