manualshive.com logo in svg

GMC 2001 Denali, Owner'S Manual

Share
Download
GMC 2001 Denali Owner'S Manual Download Page 124

2-37

Exterior Lamps

Your parking lamp and headlamp knob is on the driver’s
side of your instrument panel.

Turn the knob clockwise to the parking lamps symbol to
manually turn on:
D Parking Lamps
D Sidemarker Lamps
D Taillamps
D License Plate Lamps
D Instrument Panel Lights

Turn the knob clockwise to the master lamps symbol to
turn on all the lamps listed as well as the headlamps.

Turn the knob all the way counterclockwise to turn 
off your lamps and put the system into automatic
headlamp mode.

You can switch your headlamps from high to low beam
by pulling on the turn signal/high

-

beam lever.

Automatic Headlamp System

When it is dark enough outside, your automatic
headlamp system will turn on your headlamps at the
normal brightness along with other lamps such as the
taillamps, sidemarker, parking lamps and the instrument
panel lights. The radio lights will also dim.

Your vehicle is equipped with a headlamp off delay,
which will keep the headlamps on for a short time after
the ignition is turned to OFF. For more information see
“Secondary Information Center (SIC)” in the Index.

Your vehicle has a light sensor located on the top of 
the instrument panel in the defroster grille. Be sure it 
is not covered, or the system will be on whenever the
ignition is on.

The system may also turn on your headlamps when
driving through a parking garage, heavy overcast
weather or a tunnel. This is normal.

Summary of Contents for 2001 Denali











































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands