manualshive.com logo in svg

GMC 2001 Denali, Owner'S Manual

Share
Download
GMC 2001 Denali Owner'S Manual Download Page 274

5-20

Denali XL Models

A. Bottle Jack

B. Wheel Blocks

C. Wing Nut

D. Mounting Bracket

E. Removable Tray

F. Retaining Hook

G. Retaining Bracket

and Wing Nut

H. Tool Kit with Jack

Tools and Gloves

Denali: The equipment you’ll need is located under the
second row passenger’s seat on the driver’s side of the
vehicle, and behind the left trim panel on the driver’s
side of the vehicle. Skip the first step and follow the 
last three.

Denali XL: The equipment you’ll need is located 
under the storage tray in the rear trim panel on the
driver’s side of the vehicle.

1. Remove the tray to access the tools.

2. There is a wing nut used to retain the tool kit. 

To remove it, turn the wing nut counterclockwise.

3. To release the bottle jack from its holder, turn 

the knob on the bottle jack counterclockwise 
to lower the jack head.

4. The wheel blocks and the wheel block 

retainer can be removed by turning the 
wing nut counterclockwise.

You’ll use the jack handle extensions and the wheel
wrench to remove the underbody

-

mounted spare tire.

Summary of Contents for 2001 Denali











































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands