manualshive.com logo in svg

GMC 2001 Denali, Owner'S Manual

Share
Download
GMC 2001 Denali Owner'S Manual Download Page 383

8-2

Customer Satisfaction Procedure

Your satisfaction and goodwill are important to your
dealer and to GMC. Normally, any concerns with the
sales transaction or the operation of your vehicle will be
resolved by your dealer’s sales or service departments.
Sometimes, however, despite the best intentions of 
all concerned, misunderstandings can occur. If your
concern has not been resolved to your satisfaction, 
the following steps should be taken:

STEP ONE -- Discuss your concern with a member 
of dealership management. Normally, concerns can 
be quickly resolved at that level. If the matter has 
already been reviewed with the sales, service or parts
manager, contact the owner of the dealership or the 
general manager.

Summary of Contents for 2001 Denali











































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands