manualshive.com logo in svg

GMC 2001 Denali, Owner'S Manual

Share
Download
GMC 2001 Denali Owner'S Manual Download Page 242

4-41

Recreational Vehicle Towing

Your vehicle was not designed to be towed with all
four wheels on the ground, nor was it designed to be
towed with only two wheels on the ground. If your
vehicle must be towed, see “Towing Your Vehicle” in
the Index.

NOTICE:

Towing your vehicle with all four wheels on 
the ground will damage drivetrain components.
And, since your vehicle has all

-

wheel drive,

towing with only two wheels on the ground will
also damage drivetrain components.

Loading Your Vehicle

The Certification/Tire label is found on the rear edge of
the driver’s door or in the Incomplete Vehicle Document
in the cab.

The label shows the size of your original tires and the
inflation pressures needed to obtain the gross weight
capacity of your vehicle. This is called the GVWR
(Gross Vehicle Weight Rating). The GVWR includes 
the weight of the vehicle, all occupants, fuel and cargo.

The Certification/Tire label also tells you the maximum
weights for the front and rear axles, called Gross Axle
Weight Rating (GAWR). 

Summary of Contents for 2001 Denali











































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands