manualshive.com logo in svg

GMC 2001 Denali, Owner'S Manual

Share
Download
GMC 2001 Denali Owner'S Manual Download Page 373

7-18

Weatherstrip Lubrication

Silicone grease on weatherstrips will make them 
last longer, seal better, and not stick or squeak. 
Apply silicone grease with a clean cloth. During very
cold, damp weather more frequent application may be
required. See “Recommended Fluids and Lubricants” 
in the Index.

Automatic Transmission Check

Check the transmission fluid level; add if needed. 
See “Automatic Transmission Fluid” in the Index. 
A fluid loss may indicate a problem. Check the system
and repair if needed.

At Least Once a Year

Key Lock Cylinders Service

Lubricate the key lock cylinders with the lubricant
specified in Part D.

Body Lubrication Service

Lubricate all hood latch assembly, secondary latch,
pivots, spring anchor, release pawl, rear compartment
hinges, liftgate handle pivot points, latch bolt, fuel door
hinge, and folding seat hardware. Part D tells you what
to use. More frequent lubrication may be required when
exposed to a corrosive environment.

Summary of Contents for 2001 Denali











































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands