manualshive.com logo in svg

GMC 2001 Denali, Owner'S Manual

Share
Download
GMC 2001 Denali Owner'S Manual Download Page 303

6-15

Engine Air Cleaner/Filter

The air cleaner assembly
has an indicator that lets
you know when the engine
air cleaner/filter is dirty 
and needs to be serviced.
The indicator is located 
on the air cleaner cover.

See “Owner Checks and Services” in the Index to
determine when to check the indicator.

If the area inside the clear section of the indicator is not
completely yellow, no engine air cleaner/filter service 
is required. When the area inside the indicator is
completely yellow, past the red band, the words
“CHANGE FILTER” will be highlighted. After
changing the engine air cleaner/filter, press the top
button on the indicator to reset it.

Your engine air cleaner/filter is located in the air filter
housing near the front corner of the engine compartment
on the passenger’s side of the vehicle. See “Engine
Compartment Overview” in the Index for more
information on location.

Summary of Contents for 2001 Denali











































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands