manualshive.com logo in svg

GMC 2001 Denali, Owner'S Manual

Share
Download
GMC 2001 Denali Owner'S Manual Download Page 179

3-4

Mode Knob 

-

 Manual Operation

The right knob on the control panel allows you to
choose the direction of air delivery.

You can choose to set the climate control system
operations yourself, or let the system work for you 
by placing the system in AUTO mode. See “Mode 
Knob 

-

 Automatic Operation” earlier in this section.

VENT: This setting directs most of the air through

the instrument panel outlets and a small amount through
the floor outlets.

 BI

-

LEVEL: This setting delivers air through the

floor outlets as well as the instrument panel outlets.

 HEATER: This setting directs most of the

warmed air through the floor outlets and some air
through the windshield defroster outlets.

 BLEND: This setting divides airflow equally

between the heater floor outlet and the windshield
defroster outlets. The air conditioning compressor may
run to dehumidify the air to prevent window fogging.

 DEFROST: This setting directs most air through

the windshield defroster outlets and some through the
outlets. The air conditioning compressor may run to
dehumidify the air to prevent window fogging.

 OUTSIDE AIR: This setting should be used 

for normal system operation and directs the system 
to use outside air. Using outside air will limit stale air
odors and help to prevent excessively humid interior air 
(from wet boots or clothing or maximum passenger
loads) from being redirected onto windows.

Pressing the outside air button will cancel the
recirculation button.

RECIRCULATION: This setting limits the

amount of outside air entering the vehicle to a very small
amount. This will be helpful to limit odors entering the
vehicle and will assist in reaching comfort in very hot
temperature conditions. Pressing recirculation will cause
the system to recirculate interior air continuously and
may cause the vehicle windows to fog if the passenger
compartment floor is excessively wet.

Summary of Contents for 2001 Denali











































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands