•Page
globalcontract.com
50
• Summer 2017
GLOBAL
Contract
INSTALLATION GUIDELINES
Connecting Seat to Bridges Tables
Some bridges collaborative seating units have been designed to connect to
bridges tables supported by rectangular legs. These specialized units are
selfsupporting, but connect to other components to form a rigid, integrated
assembly.
Note: The Single sided and Double sided bridges seat kits do not share table
legs and should, therefore, be treated as structurally separate assemblies. The
samples on the left consist of a separate Back 2 Back table on the left, the seat
kit in the middle and another separate Back 2 Back table assembly on the right.
Begin by installing and leveling both Back 2 Back table frame assemblies.
STEP 1: Place Collaborative seating beam on top of both table leg beams,
as close as possible to the central work surface-mounting tab. Secure work
surfaces to frames.
STEP 2: Position one of the assemblies in its fi nal location and align the second
assembly, leaving 48” (or 60”) in between the work surfaces.
Proceed by assembling seat, rear board and 6” deep
work surface
STEP 3: Drive supplied connector screws into the holes
along the top edge of the rear board.
STEP 4: Rest the rear board on a clean, horizontal
surface, join the board with 6” work surface.
STEP 5: Use a screwdriver to tighten all connectors.
48”/60”
1
2
3
5
4
NOT UL LISTED
