Page
•
globalcontract.com
43
• Summer 2017
GLOBAL
Contract
Storage Spine
Storage units of equal depth can be confi gured to form longer, interconnected units
supported by shared legs. The following steps describe how to convert single storage
leg into a shared one:
Every storage leg is provided with two hole patterns: 3+3 holes positioned closer to the
edges of the leg extrusion and 2+2 hole pattern closer to the centre of the extrusion.
STEP 1: Remove six screws securing the leg to the bottom of the storage unit. (3+3 hole
pattern). Three of the six screws are machine thread screws. Store them in a safe place
in case you will need to relocate the storage leg agin in future. The remaining three long
screws will be used.
STEP 2: Move the leg so that one half is located under the storage bottom, while the
other half remains exposed. Align two of the 2+2 pattern holes with pre-drilled holes in
the storage unit gable.
Use Allen key to secure the leg with two screws.
STEP 3: Remove support leg from the adjacent storage unit, rest the unit on the shared
leg, press it against the storage cabinet’s side gable. Use Allen key to secure the bottom
of the adjacent storage unit with two screws.
Keep the removed leg and fasteners in a safe place for future reconfi gurations.
1
2
3
INSTALLATION GUIDELINES
NOT UL LISTED
