Page
•
globalcontract.com
21
• Summer 2017
GLOBAL
Contract
INSTALLATION GUIDELINES
Power Distribution Storage Power Box
In order to secure Storage power box to Storage cabinets it is necessary to reposition
one of the storage supporting legs so that it will support the Storage power box as well.
Every storage leg is provided with two hole patterns: 3+3 holes positioned closer to the
edges of the leg extrusion and 2+2 hole pattern closer to the centre of the extrusion.
STEP 1: Remove six screws securing the leg to the bottom of the storage unit. (3+3
hole pattern). Three of the six screws are machine thread screws. Store them in
a safe place in case you will need to relocate the storage leg again in future. The
remaining three long screws will be used.
STEP 2: Move the leg so that one half is located under the storage bottom, while the
other half remains exposed. Align two of the 2+2 pattern holes with pre-drilled holes
in the storage unit gable.
Use an Allen key to secure the leg with two screws.
STEP 3: Rest the Storage power box on the leg, press it against the storage cabinet side
gable. Use Allen key to secure the bottom of the Storage power box with two screws.
STEP 4: Lower top bracket (Left and Right brackets required) into the corner adjacent
to the storage unit and rotate it so that the single-hole end of the bracket slides under
storage unit top as illustrated.
STEP 5: Align the bracket with two pre-drilled holes and secure with supplied screws.
Install the second bracket on the opposite side.
STEP 6: Open cabinet’s door, drawer (removal of the drawer might be necessary)
and secure both brackets to the storage unit’s top with supplied wood screws.
STEP 7: Follow installation instructions included with the outlet/data module to secure
it to the Storage Power Box top. Connect power / data cables and push the top over the
box until the four connector pins snap in place.
Organize cables under storage cabinets by installing Cable basket.
1
2
3
4
5
6
7
NOT UL LISTED
