GEK-105593C
80
Screen
Possible values
59NH PICKUP
YES - NO
59NL PICKUP
YES - NO
79 STATUS
IN /OUT OF SERVICE
PROTEC. STATUS
IN / OUT OF SERVICE
ACTIVE TABLE
1:TABLE 1: 2:TABLE 2 3:TABLE 3
STATUS 52
OPEN - CLOSE
DIRECTION A
PERMISSION - BLOCK
DIRECTION B
PERMISSION - BLOCK
DIRECTION C
PERMISSION - BLOCK
DIRECTION G
PERMISSION - BLOCK
REM CONNECTION
IN / OUT OF SERVICE
LOCAL CONNECTION
IN / OUT OF SERVICE
DATE / TIME STATUS
CORRECT
E2PROM COMM
CORRECT
COMM SETTINGS
USER - DEFAULT
PROTECTION LINK
YES - NO
DATE & TIME
(SHOWS DATE & TIME)
8.4. OPERATIONS GROUP.
This group allows you to operate the breaker from the keyboard, and also to block or unblock the recloser
and to synchronize the time on the unit. To access this group, press the ACT key when the SMOR is in the
stand-by screen. This takes you to the operations menu and shows the first item on the menu:
This shows that the first item on the operations menu is the function for entering the date and time for the
relay. When the UP/DOWN ARROW keys are pressed the rest of the items on the operations menu appear.
After locating the required operation use the ENT key to select it.
To avoid carrying out operations by mistake the keyboard program requires confirmation of the operation
selected. To confirm, press the 1/Y key and then ENT. To abort the operation press the 3/N key and then
ENT. Pressing CLR is the equivalent of pressing the 3/N key and then ENT, aborting the operation.
If the command is confirmed the result of the operation appears on the screen. With either ENT or CLR you
can accept this message and return to the operations menu.
By way of example, this would be the process for opening the breaker starting from the operations menu;
If the breaker had not opened the result of the operation shown on the screen would have been "NOT
PERFORMED".
The SMOR can perform the following operations:
•
Set date/time
•
Block recloser
•
Unblock recloser
•
Oscillography triggering
•
Reset current maximeter
SET
DATE/TIME
OPEN BREAKER
CONFIRM?
(Y/N)
ENT
1/Y
PERFORMED
Summary of Contents for SMOR-B GEK 105593C
