GE SMOR-B GEK 105593C, Instructions Manual

Page: 83 / 103

GEK-105593C
78
To make this change we will start from the rest screen and take the following steps:
Pressed key Screen status Notes
SMOR
GENERAL ELECTRIC
Start from the rest screen.
SET VIEW PROTECTION
SETTINGS
Enter level 1
↑
MODIFY PROTECTION
SETTINGS
Move through options in level 1
ENT GENERAL
SETTINGS
Enter level 2
ENT RELAY STATUS
IN SERV ----------
Enter level 3.
IN SERV is the factory setting for RELAY
STATUS. The actual value is on the left and
the new value is on the right.
↓
PHASE ROTATION
ABC -------------
Move through options in level 3.
↓
DEMAND TIME
60 -------------
Look for the required setting
←
DEMAND TIME
60 30_
Move through options in level 3.
←
DEMAND TIME
60 15_
The required entry is found
ENT DEMAND TIME
60 15
Accept entry 15
END CONFIRM?
(Y/N)
Ask for confirmation.
Y SETTINGS CHANGE
EXECUTED
Change done
CLR RELAY STATUS
IN SERV -------
Return to settings list
CLR GENERAL
SETTINGS
Go up to level 2
CLR MODIFY PROTECTION
SETTINGS
Go up to level 1
CLR SMOR
GENERAL ELECTRIC
Reset status
8.3. INFORMATION GROUP.
This group provides information about the status of the SMOR. Press the INF key in the main menu to
access this group. The information group consists of the following sub-groups:
• Status
Press the INF key to access this subgroup in the same way as in the operation in the settings group. This
takes us to level 1 in the menus. When this sub-group has been selected ( in this case it is the only option)
we press the ENT key to see the contents (down to level 3). In this level we can move through the contents
by using the UP/DOWN arrows. Press the CLR key repeatedly to leave the information group and return to
the stand-by screen.