GEK-105593C
70
UP / DOWN ARROW: Change options. The equivalent of a horizontal movement within a menu. When the
required option appears on the screen it can be selected with the ENT key.
LEFT / RIGHT ARROWS: Show the different possibilities of a given setting. It is not used for all settings.
When the required option appears on the screen it can be selected with the ENT key.
8.1. MENU TREE.
The SMOR has different menus, divided into levels. Level 0 is the initial screen. Level 1 of the menus is
accessed by pressing the corresponding group key (SET, INF, etc). Moving within a given level is done by
using the UP and DOWN arrows. It is possible to go down to levels 2 and 3 by pressing the ENT key. Press
CLR to go up a level within the menu tree. Level 1 for each of the five groups is shown in the following table:
Group
Level 1
Description
SET
•
VIEW SETTINGS
•
View settings
•
MODIFY SETTINGS
•
Change settings
•
MODIFY COUNTERS
•
Change counters
INF
•
STATUS
•
Show the status of the relay
ACT
•
SET DATE/TIME
•
Change date and time on the relay
•
BLOCK RECLOSER
•
Block the recloser
•
UNBLOCK RECLOSER
•
Unblock the recloser
•
COMM. TRIGGER
•
Trigger oscillography by communication
•
RESET I MAXIMETER
•
Reset current (I) maximeter
•
RESET POT MAXIMETER
•
Reset power maximeter
•
OPEN BREAKER
•
Open the breaker
•
CLOSE BREAKER
•
Close the breaker
ENT
•
I2
•
Show negative sequence current in Amps
referred to primary
•
Ia
•
Show phase A current in Amps referred to
the primary.
•
In
•
Show ground current in Amps referred to the
primary
•
Vab
•
Show voltage between phases AB in kV
referred to the primary
•
P
•
Show Active Power in MW
•
COS PHI
•
Show Power factor
•
FREQUENCY
•
Show frequency in Hz
•
TRIPS IN 1 HOUR
•
Show the number of trips in the last hour
•
I. MAXIMETER
•
Show current (I) maximeter
•
I2t A COUNTER
•
Show the accumulated Amps counter for
phase A
•
I2t B COUNTER
•
Show the accumulated Amps counter for
phase B
•
I
2
t C COUNTER
•
Show the accumulated Amps counter for
phase C
•
Nº OPENINGS
•
Show the number of opening operations
carried out
•
Nº RECLOSURES
•
Show the number of reclosing cycles carried
out
•
POT. MAXIMETER
•
Show power demand meter
Summary of Contents for SMOR-B GEK 105593C
