GE moisture.IQ, User Manual

Page: 105 / 182

moisture.IQ User’s Manual 93
Chapter 8. Troubleshooting
Chapter 8. Troubleshooting
The moisture.IQ is designed to be maintenance and trouble free; however, because of process conditions and
other factors, minor problems may occur. Some of the most common problems and procedures are discussed
in this section. If you cannot find the information you need in this section, please consult BHGE.
This chapter covers the following topics:
•
Screen Messages (see “Screen Messages” below)
•
Common Problems (see “Common Problems” on page 96 )
8.1 Screen Messages
The moisture.IQ has several screen messages that may display during operation. Refer to Table 11 below for
a list of these messages and the possible causes.
WARNING! Do not attempt to troubleshoot the moisture.IQ beyond the instructions in this section. If
you do, you may damage the unit and void the warranty.
Table 11: Screen Messages and the Possible Causes
Screen Message Possible Cause System Response Action
CHANNEL NOT
AVAILABLE Module not installed None Select a different channel.
NO PROBE Unit has not been
configured for the probe
activated. For
example, you cannot
display
pressure on a channel
where only an M Series
probe is
configured. None Make sure the correct probe is
activated as described on page 60.
Connect the required probe.
NOT AVAILABLE The mode and/or units
selected require more data
or need a
different probe. For
example, you cannot read
%RH with a
moisture probe that does
not have the temperature
option. None Choose a different mode and/or
units as described on page 60.
Connect the required probe.