GE GL317D, Instruction Manual

Page: 290 / 296

Installation
Installation of operating device
GE Information
L31- 7902EN/02
8/12
11- 2016
Fastening the operating device
Installing
the fastening nuts
The table below gives the steps of installing the operating device fastening
nuts :
Step Action
1 Install the spacer (22), washer (10) and the nut (14) on the lower
fastening screw “ B ”.
NOTE : Do not tighten the nut (14).
2 Install the eccentric spacers (23), washers (10) and the nuts (14) on
the upper fastening screws “ C ” and “ D ”.
NOTE : Do not tighten the nuts (14).
3 Rotate the eccentric spacers (23) to do the contact with the lower
edge of the pole- support oblong holes.
4 Tighten - temporarily at the indicated tightening torque - the fasten-
ing screws (9).
22
x 1
23
10
14
x 2
10
14
23
5 daN.m
9
” B ”
” C ”
” D ”
Continued on next page.