GE GA000100, Service Manual

Page: 351 / 802

GE H
EALTHCARE
D
IRECTION
GA091568, R
EVISION
5 VIVID E9 S
ERVICE
M
ANUAL
Chapter 8 - Replacement procedures 8 - 17
8-4-10-3 Boot from the System Software DVD
1.) Insert the applicable VIVID E9 System Software DVD into the DVD drive.
2.) Power down the VIVID E9.
3.) Wait until the ON/Standby switch has turned amber.
4.) Power ON the VIVID E9. The VIVID E9 starts to boots.
First, the BIOS software is loaded, and the BIOS Boot Screen is displayed.
Next, the BEP starts to boot from the disc in the DVD drive.
Several screens will be displayed, indicating the progress.
5.) If asked for; press F , and the booting continues.
Figure 8-5 BIOS Boot Screen (BEP6)
Figure 8-6 First four screens - starting PC-DOS and loading drivers for the DVD-drive
Starting PC DOS. . .
Starting PC DOS. . .
This driver is provided by Oak Technology, Inc . .
OTI-91X ATAPI CD-ROM device driver, Rev D91XV352
(C)Copyright Oak Technology Inc. 1987-1997
Device Name
: MSCD000
Transfer Mode
Number of drives
: Programmed I/O
: 1
THE TEXT IN THESE SCREENS
DEPEND ON THE INSTALLED
DVD DRIVE MAKE AND
MODEL.
PRESS ‘F’ TO CONTINUE
*******************************
Loading . . .