GE FQ000040, Service Manual

Page: 540 / 698

GE
D
IRECTION
FQ091019, R
EVISION
2 V
IVID Q
N S
ERVICE
M
ANUAL
8-34 Section 8-3 - Internal Component Replacement Procedures
8-3-2-4 TR32 and RFI Boards Removal Procedure
1) Remove the bearing handle, as described in the "Bearing Handle Removal Procedure" on page 8-2 .
2.) Remove the Control Panel and Keyboard, as described in the "Control Panel and Keyboard
Removal Procedure" on page 8-10 .
3.) Loosen the eight screws that secure the TR32 and RFI Boards to the Bottom Assembly, as shown
in Figure 8-36 below .
4.) Remove the eight screws - see Figure 8-37 .
5.) Disconnect the PCI cable flex (BEP-to-RFI) from the cable connector on RFI Board as shown in
Figure 8-36 Loosen Screws that Secure TR32 and RFI Boards to Bottom Assembly
Figure 8-37 Removing the Screws