GE
D
IRECTION
FQ091019, R
EVISION
2
V
IVID Q
N S
ERVICE
M
ANUAL
Chapter 3 - System Setup
3-105
NOTE:
The IP address must be different from the one used for the Vivid q N system.
8) Type in the
Subnet mask 255.255.255.0
.
NOTE:
The Subnet mask should be the same for both the network computer and the
Vivid q N.
9) Click
OK
, close all windows and approve all changes. Return to regular mode.
10) Connect the Vivid q N and network computer LAN connection using a cross over Network cable.
(Normally with RED connector covers on both sides, cable not longer than 100 meters).
The Vivid q N and the network computer are now ready for export, import of files.
NOTE:
One can check the connection by pinging to the Vivid q N IP, as follows:
a.) Select <
Start
>, <
Run
>
b.) Type
CMD
, then press <
Enter
>
c.) Type
Ping
and
IP 10.0.0.1
for Vivid q N then press <
Enter
>.
If return timing is OK, you have an operating network connection.
