3.9.6 O-8# Drive Port Diagnostics
These parameters are used for monitoring the bus
communication via the Drive port.
O-80 Bus Message Count
Range:
Function:
0
*
[0 - 0] This parameter shows the number of valid
messages detected on the network.
O-81 Bus Error Count
Array [6]
Range:
Function:
0
*
[0 - 0] This parameter shows the number of messages with
faults (for example CRC fault) detected on the
network.
O-82 Slave Messages Rcvd
Range:
Function:
0
*
[0 - 0] This parameter shows the number of valid
messages addressed to the slave sent by the
frequency converter.
O-83 Slave Error Count
Range:
Function:
0
*
[0 - 0] This parameter shows the number of error
messages, which could not be executed by the
frequency converter.
O-89 Diagnostics Count
Range:
Function:
0
*
[-2147483648 - 2147483647]
3.9.7 O-9# Bus Jog / Feedback
O-90 Bus Jog 1 Speed
Range:
Function:
100 RPM
*
[0 - par. F-17
RPM]
Enter the jog speed. Activate this
fixed jog speed via the serial port
or network option.
O-91 Bus Jog 2 Speed
Range:
Function:
200 RPM
*
[0 - par. F-17
RPM]
Enter the jog speed. Activate this
fixed jog speed via the serial port
or network option.
O-94 Bus Feedback 1
Range:
Function:
0
*
[-200 -
200]
Write feedback to this parameter via the serial
communication port or network option. This
parameter must be selected in
parameter CL-00 Feedback 1 Source
,
parameter CL-03 Feedback 2 Source
or
O-94 Bus Feedback 1
Range:
Function:
parameter CL-06 Feedback 3 Source
as a feedback
source.
O-95 Bus Feedback 2
Range:
Function:
0
*
[-200 - 200] See
for further
details.
O-96 Bus Feedback 3
Range:
Function:
0
*
[-200 - 200] See
for further
details.
Parameter Description
88
03/2016 All rights reserved.
DET-620D
3
3
